Introduction
Motorcycle Helmets, in many parts of the USA, and in many other countries n the world, are mandatory when riding motorcycles, scooters or ATVs. Riding a motorcycle can be a dangerous thing, and a small accident is never far away. Simply loosing your foot while coming to a stop at a red light and falling over is not as rare as you might think.
When your head hits the ground, not matter at what speed, it will suffer consequences. It's therefore a good idea, even if the local law does not make it mandatory, to use a motorcycle helmet.
But buying a helmet requires a few thing you need to look out for.
Fitting A Motorcycle Helmet
No matter what kind of a Motorcycle helmet you buy (apart from half helmets), one thing that you need to make sure off when fitting a motorcycle helmet:- once it is on, make sure it fits snugly. When your motorcycle helmet is on, and the chin strap is closed (preferably tightly), move the chin protector or the top of the motorcycle helmet with your hand. You must feel resistance! If the motorcycle helmet moves very freely, it will come off if you have an accident, and you loose the benefits of its protection.
But do watch out. A motorcycle helmet that is too tight is bad for you. It will prevent proper blood circulation, and make you tired, even dizzy.
Sun Visors
Many types of Motorcycle helmets can be found with a movable sun visor. This should be on the top of your shopping list when looking for a new motorcycle helmet.
The sun visor is something you can move up or down to diminish the sun if it is shining in your face, much like sun visors in cars.
Types of Motorcycle Helmets
Like with everything in this world, there are always several choices, and your choice of a motorcycle helmet is one of them. There are 4 main groups of motorcycle helmets available, each with more manufacturers than what you will ever need.
Mostly, each category of helmet has its usage, though most can be used for different usages.
Full Face motorcycle Helmet
The safest type of motorcycle helmet out there is the “full face,” also known as “integral helmet”. Integral helmets cover your whole head, and the helmet consists of one piece. The chin and mouth protection is an integral part of the motorcycle helmet, so if you do hit the pavement, your chin, mouth and teeth should be well protected.
USAGE: The integral helmet is used mostly for speed riding, like races and fast street motorcycle, but also for touring or long distance riding. It is never used for riding off road, unless it's a purpose made off road helmet (see below).
SOUND: An added advantage of an integral helmet is that it isolates outside sounds more than any other type of helmet.
FITTING: Fitting an integral helmet needs a bit more patience and experience. If you wear glasses, you will need to take them off before putting on the helmet. You need to slide the helmet, usually with the top part high, and squeeze it over your head.
The helmet should fit very snuggle. Make sure the mouth/chin protector does not sit on your mouth, and that there is sufficient space between your mouth and the protector.
Click here to see a range of Full face motorcycle Helmets
Modular Helmet
Modular helmets, also know as flip-up helmets, are your next best bet in terms of safety, and one of the most widely used helmets. They offer a full face protection, but the chin/mouth protection flips away from your face when not riding.
The chin protector usually slides up, after pressing a button or two, but some models offer the protector sliding sideways.
The advantage of a modular helmet is that it is easier to put on, and you can instead of having to remove your helmet to, for example, talk to someone, you just slide open the front part.
The downside is that it does offer a little bit less protection, since it has been known that in some accidents, the chin protector has broken on impact. A lot of will depend on the quality of the manufacturer.
USAGE: Street and touring.
FITTING: Fitting a modular helmet is easier than an integral helmet, but as with all helmets it should fit snuggly. When you put it on, move the chin/mouth protector completely up (or sideways), take the sides of the helmet with both hands, and gently move apart.
While holding the sides gently apart, slide the helmet over your head, and then release the sides. Close the chin protector and make sure the helmet fits snugly, but not too tight.
SOUND: Modular helmets offer a good protection against outside noise and wind.
Click here to see a range of Modular Helmets
Open Face Helmet
Open face helmets, also known as jet helmets, are helmets that offer head and ear protection, but are totally open in the front, apart from usually a visor.
Although some open face helmets have a metal chin protector, usually a metal rod, they offer no protection if your face hits the pavement.
Most open helmets have visors, some even have an extra sun visor.
USAGE: Street, commuter and often found with scooter riders.
FITTING: Fitting an open/jet helmet is easy. Hold the sides and gently pull apart, sliding the helmet over your head.
Open helmets tend to move more than integral or modular helmet, so the strap is a very important part of the helmet. When your strap is closed, preferably quite tight, there will be more movement, but your helmet should stay in place when juggled.
SOUND: Open face helmets offer an adequate sound protection.
Click here to see a range of Open face Helmets
Off-road Helmet
Off-road helmets are meant for riding off-road, motocross or enduro. Their shape is a bit like an integral helmet, but the chin/mouth protector extends more forward, offering a better protection when hitting the ground when you fall of your motorcycle, and offering you easier breathing.
The helmet rarely has a visor, and you will need to use goggles that fit your helmet.
USAGE: Off-road riding
FITTING: Fitting an off-road helmet is like that of an integral helmet, it requires a bit of experience, since they are quite tight. If you wear glasses, you will need to remove them before you put on the helmet.
You will need to ensure that the helmet fits pretty tight on your head, since the chances that you fall are much higher off-road than on the street. But makes sure your blood can flow properly in your head.
SOUND: Off-road helmets offer some sound protection, though usually the noise of riding off-road is so high, the sound protection will be just enough to avoid you from becoming deaf.
Click here to see a range of Off-road Helmets
Half Helmet
Half helmets, also known as beanie helmets, offer just a protection for the top of your head. In case of an accident, your chin, mouth and ears are not protected at all.
Half helmets rarely have visors.
USAGE: Street, commuter.
FITTING: Fitting a half helmet is easy. Just put it on the top of your head. When you close the straps, your helmet will still move quite a lot, since there is no hold on the side of your head.
SOUND: Half helmets offer no sound protection whatsoever.
Click here to see a range of Half Helmets
Options
Many of the types of helmets now offer you an integrated Bluetooth communicator, either with the helmet, or something you can fit afterwards.
These Bluetooth units offer you the ability to use your mobile phone, listen to music and/or your navigation device, and communicate with your pillion. Some even allow you to communicate with other motorcycle riders, as long as they have the same equipment.
In case you are wondering which helmets offer the best protection, and built the best, offering the best sound protection, one reference exists in the world, at that is in the United Kingdom. They have a government testing facility which tests many helmets, rating them for their protection.
No comments:
Post a Comment